TESWAY X5 AWD: Long Range Through Electric Bike with 3600W Peak Power

Planning a long ride? Maybe you're heading out for a weekend adventure, exploring new roads, or simply taking a longer route without worrying about running out of battery. A bike with plenty of power and range can make those rides much easier.

The TESWAY X5 AWD is built for riders who want to go farther without holding back. Its dual motor system and 52V 60Ah battery provide the power and range for longer adventures. Let's take a closer look at the TESWAY X5 AWD and everything it has to offer.

What Makes the TESWAY X5 AWD Different?

The TESWAY X5 AWD brings together three main features: an easy mount step through frame, a dual motor all wheel drive system, and a high capacity battery.

Instead of focusing on just one performance feature, TESWAY combines motor power, battery capacity, suspension, and rider controls to create an electric bike for different riding conditions.

Here is a closer look at what the X5 AWD offers:

• 3600W peak motor power: Two 1000W motors deliver 2000W of combined rated power and up to 3600W peak power.

• 200Nm torque: Provides strong acceleration and climbing support.

• 52V 60Ah battery: Offers up to 200 miles of pedal assist range and up to 180 miles in pure electric mode.

• Step through frame: Makes getting on and off the bike easier.

• Single and dual motor modes: Let riders choose between one motor and both motors.

• 20 x 4.0 inch Kenda fat tires: Provide a wide contact area and stability across different surfaces.

• Front and rear suspension: Help absorb bumps and vibrations.

• Four piston hydraulic brakes: Deliver controlled braking performance.

• Smart LCD display with NFC: Provides riding information and convenient access to display controls.

• 400 lbs payload capacity: Supports the combined weight of the rider and additional cargo.

Want to learn more about the bike's setup and operation? Check out the official TESWAY X5/X7 AWD Electric Bike Manual for detailed instructions on riding modes, LCD controls, battery charging, and maintenance.

Step Through Frame for Easier Mounting

One of the first things you'll notice about the TESWAY X5 AWD is its step through frame.

Unlike a traditional high top tube bike, the step through design provides a lower opening between the handlebars and seat. This means you don't need to swing your leg as high over the frame when getting on or off the bike.

It is a practical design for riders who frequently stop and start during city rides, prefer easier access, or simply want a more convenient way to mount their electric bike.

The step through frame can be particularly useful when:

• Getting on and off the bike frequently during daily rides.

• Wearing everyday clothing that makes swinging a leg over a high frame less convenient.

• Carrying a backpack or other personal items.

• Stopping at traffic lights or making frequent stops along a route.

Reinforced Non Folding Frame

Although the X5 AWD has a step through design, it uses a reinforced non folding frame rather than a folding mechanism.

This design keeps the frame structure fixed and avoids the additional joints and locking mechanisms found on folding electric bikes. It is built around a sturdy frame structure for everyday riding and heavier loads.

The frame also includes additional water bottle mounting points, giving riders more options for carrying essentials on longer journeys.

One thing worth considering is the bike's size and weight. The X5 AWD weighs 119 lbs (54 kg), so it is better suited to riders with enough storage space than those who regularly need to carry an electric bike upstairs or transport it in a small vehicle.

3600W Dual Motor AWD System: Power for Different Terrains

Power is one of the biggest selling points of the TESWAY X5 AWD.

The bike uses two 1000W motors, one at the front and one at the rear. Together, they deliver 2000W of rated power and up to 3600W of peak power, with 200Nm of torque.

Unlike a conventional single motor electric bike, which sends power to only one wheel, the X5 AWD uses two motors to drive both wheels when Dual Drive mode is selected.

This gives riders the option to use one motor for everyday riding or both motors when additional power and traction are needed.

How Does the Dual Motor AWD System Work?

The X5 AWD has a motor installed at both the front and rear wheels.

When riding in Single Drive mode, the bike operates using one motor. When Dual Drive mode is activated, both motors work together to deliver power to the front and rear wheels.

This all wheel drive setup can help improve traction when riding on surfaces where maintaining grip is more challenging.

For example:

• Uphill roads: The dual motor system provides power to both wheels to help with climbing.

• Gravel paths: Power delivery to both wheels can help maintain traction on loose surfaces.

• Uneven roads: The additional drive option gives riders more flexibility when road conditions change.

• Everyday riding: Single Drive mode offers another option when you don't need the combined output of both motors.

The ability to switch between these modes gives the X5 AWD more flexibility than a bike with only one fixed motor configuration.

Single Motor vs. Dual Motor: Which Mode Should You Use?

One useful feature of the X5 AWD is that riders can switch between Single Drive and Dual Drive modes through the LCD control system.

The actual difference in power consumption depends on speed, terrain, rider weight, and how much assistance you use.

You can switch between the two drive modes by pressing the Info button on the handlebar control unit. The display also shows which drive mode is currently selected.

200Nm Torque for Strong Acceleration and Hill Climbing

Motor power is important, but torque also plays a major role in how an electric bike performs.

The X5 AWD delivers up to 200Nm of torque. Torque is the rotational force produced by the motors, and it plays an important role when accelerating from a stop or climbing an incline.

For riders, this means the bike has substantial motor assistance available when starting on a hill, riding uphill, or carrying additional weight.

The combination of dual motors and 200Nm of torque gives the X5 AWD a power system designed for more than just flat city roads.

52V 60Ah Battery: 3120Wh of Energy Capacity

A powerful motor system needs a battery that can keep up. That's why the TESWAY X5 AWD comes with a 52V 60Ah lithium ion battery.

To understand its capacity, you can multiply voltage by amp hours:

52V x 60Ah = 3,120Wh

This gives the X5 AWD a total battery capacity of 3.12kWh.

For an electric bike with two motors and high peak power, this large battery provides substantial energy for extended rides.

The battery is designed to support both the motor system and the bike's electrical features, including the LCD display and lighting system.

Up to 200 Miles of Riding Range

TESWAY lists the following maximum range figures for the X5 AWD:

The pedal assist figure represents the maximum advertised range when the rider contributes power through pedaling while receiving motor assistance.

Pure electric mode allows the bike to move using the throttle without requiring the rider to pedal.

These figures are maximum advertised ranges, not guaranteed distances for every ride. Actual range will depend on how much motor assistance you use and the conditions you ride in.

What Affects the Real World Range of the X5 AWD?

Even with a 60Ah battery, several factors can change how far you travel on a single charge.

1. Rider and Cargo Weight

The more weight the bike carries, the more energy the motors generally need to move it. This includes the rider, personal belongings, and any additional cargo.

2. Riding Terrain

Flat roads usually require less energy than steep hills or rough surfaces. Gravel paths and uneven roads can also increase rolling resistance.

3. Riding Speed

Maintaining a steady speed generally uses less energy than repeatedly accelerating and slowing down. Higher speeds also require more power to overcome air resistance.

4. Single Motor vs. Dual Motor

Using both motors requires more electrical power than using one motor under comparable conditions. Single Drive mode can help reduce battery consumption when you don't need additional power from both motors.

5. Tire Pressure

Keeping the 20 x 4.0 inch fat tires properly inflated helps reduce unnecessary rolling resistance and makes the bike more efficient.

6. Pedaling Effort

Pedaling while using motor assistance can help reduce the amount of electricity required from the battery. If you want to extend your range, combining your own pedaling effort with an appropriate assist level is a practical approach.

To get more distance from each charge, keep the tires properly inflated, maintain a clean and lubricated chain, check that the brakes are not rubbing, and choose an assist level that matches the road conditions.

8A Fast Charging and Removable Battery

The TESWAY X5 AWD comes with a 58.8V 8A fast charger designed to reduce charging time.

According to TESWAY, the 8A charger can charge the battery up to 50% faster than a standard 5A charger.

This is particularly useful for riders who use their bike frequently and need to recharge between longer journeys.

Removable Battery for More Convenient Charging

The X5 AWD battery is removable and secured to the frame with a key lock.

This gives you two charging options:

• Charge the battery while it is installed on the bike.

• Remove the battery and take it to a convenient charging location.

The removable design is useful if you park the bike in a garage, shared storage area, or another location where a power outlet may not be available nearby.

It also gives you the option to remove the battery when leaving the bike parked for additional security.

However, the battery itself weighs 29.8 lbs (13.5 kg), so take care when removing, carrying, and reinstalling it.

Battery Care and Charging Tips

A large battery is a valuable part of an electric bike, so proper charging and storage habits matter.

TESWAY recommends the following battery care practices:

• Use the supplied 58.8V 8A charger or an approved replacement.

• Avoid regularly draining the battery completely before charging.

• Start charging when the battery level drops below approximately 20%.

• Turn off the battery before charging.

• Charge in a suitable environment between 32°F and 104°F.

• If storing the bike for an extended period, keep the battery charged and recharge it periodically.

The charger indicator turns from red to green when charging is complete. Disconnect the charger after the battery reaches full charge.

TESWAY also states that the X5 AWD electrical system is UL 2849 certified by TÜV, while the battery pack is UL 2271 certified. These certifications relate to the safety of the electrical system and battery pack.

Riding Modes and Controls: More Ways to Ride

The TESWAY X5 AWD gives riders several ways to control motor assistance, depending on the terrain, riding conditions, and personal preference.

Along with five pedal assist levels, it features a half twist throttle, cruise control, walk assist, and selectable Single Drive and Dual Drive modes.

Five Pedal Assist Levels

The X5 AWD offers five pedal assist levels, numbered 1 through 5, plus Level 0 for riding without motor assistance.

When pedal assist is active, the motor provides power as you pedal forward. You don't need to push particularly hard on the pedals to receive assistance, making it easier to maintain a steady pace and cover longer distances.

You can adjust the assist level using the Plus and Minus buttons on the handlebar control.

Lower levels provide less motor assistance, while higher levels deliver more assistance when you need additional power for acceleration or hills.

When you apply either brake, motor assistance automatically stops, allowing the bike to slow down.

Half Twist Throttle

The half twist throttle lets you control motor power directly with your hand.

Simply twist the throttle to increase motor assistance and release it when you want to slow down.

Unlike pedal assist, throttle operation does not require you to pedal. You can also combine pedaling with throttle assistance when you want to contribute some of your own effort and reduce battery consumption.

Cruise Control

The X5 AWD also includes cruise control for pure electric riding.

According to the user manual, you can activate cruise control by pressing and holding the Minus button in pure electric mode.

Cruise control can be released through braking, pedaling, or throttle input.

This feature gives riders another way to manage motor operation during suitable stretches of riding.

Walk Assist

Walk Assist is a practical feature when you need to move the heavy X5 AWD without riding it.

Press and hold the Minus/Walk Assist button to activate the function. The bike will move at approximately 6 km/h (3.7 mph).

Release the button to stop the assistance.

This can be useful when pushing the bike up a gentle slope or moving it through an area where riding is inconvenient.

Walk Assist is designed for pushing the bike, not for riding on it.

Smart LCD Display and NFC Control

The TESWAY X5 AWD features a full color LCD display that puts important riding information within easy reach.

Rather than showing speed alone, the display provides several indicators to help you monitor the bike's performance and settings.

NFC Unlocking

The LCD display supports NFC unlocking, giving riders another way to turn the display on and off.

To start the bike, first turn the battery lock key clockwise to the ON position. Then press the display power button or place a compatible NFC card near the display.

This makes it convenient to access the bike's controls without relying only on the display's physical power button.

Five Button Handlebar Control

The handlebar control unit features five buttons, each with a different function.

• Plus Button: Increases the pedal assist level.

• Minus/Walk Assist Button: Decreases the assist level and activates Walk Assist when held.

• On/Off Button: Controls the LCD display.

• Light Button: Turns the front headlight on or off.

• Info Button: Switches between trip and total mileage information and changes between Single Drive and Dual Drive modes.

These controls let riders adjust important settings without needing to reach down to the display.

The LCD also has a USB charging connection for compatible electronic devices, which can be useful when carrying a phone or other small device on longer rides.

Front and Rear Suspension for a More Comfortable Ride

A powerful motor is only part of the riding experience. Suspension also matters, especially when riding over uneven roads.

The TESWAY X5 AWD combines a 120mm hydraulic dual crown front fork with a rear spring suspension system.

120mm Hydraulic Dual Crown Front Fork

The front suspension features a dual crown design with 120mm of travel.

Suspension travel refers to how far the fork can compress to absorb an impact. When the front wheel moves over a pothole, bump, or uneven section of road, the fork compresses to help reduce the impact transferred to the handlebars and rider.

The X5 AWD also uses a hydraulic lockout function.

This allows riders to adjust the front fork for different conditions. Keeping the suspension active is useful on uneven roads, while using the lockout provides a firmer front end when riding on smoother surfaces.

Rear Spring Suspension

The rear of the X5 AWD uses a spring suspension system to help absorb impacts from the rear wheel.

When riding over bumps or uneven surfaces, the rear suspension compresses to reduce some of the shock transferred through the frame and saddle.

Together, the front and rear suspension systems help improve comfort and control across different riding conditions.

20 x 4.0 Inch Kenda Fat Tires for Better Stability

The X5 AWD comes equipped with 20 x 4.0 inch Kenda fat tires.

Compared with narrower bicycle tires, these wider tires provide a larger contact area with the ground. This helps improve stability and gives riders more confidence when moving between different surfaces.

The wide tire design is useful for:

• Paved roads and city streets.

• Gravel paths.

• Packed dirt roads.

• Uneven surfaces.

• Light off road trails.

The 20 inch wheel size also gives the bike a compact wheel design, while the 4.0 inch tire width provides a broad contact area.

The tires feature 360 degree reflective side strips. These reflective details help make the bike more visible to other road users when riding in low light conditions.

The Kenda tires combine wide tread, stability, and everyday versatility, making them an important part of the X5 AWD's overall riding setup.

Four Piston Hydraulic Disc Brakes for Reliable Stopping Power

With 3600W of peak motor power and a listed maximum speed of 38 mph, reliable braking is an important part of the X5 AWD's design.

The bike uses four piston hydraulic disc brakes on both the front and rear wheels, paired with 203mm brake rotors.

Why Use Four Piston Hydraulic Brakes?

Brake calipers use pistons to press the brake pads against the rotor when you pull the brake lever.

Compared with a standard two piston design, a four piston caliper uses more pistons to apply pressure to the brake pads. This provides a braking setup designed to handle the demands of a powerful and relatively heavy electric bike.

Hydraulic brakes also offer responsive lever feel and controlled braking.

203mm Disc Rotors

The X5 AWD uses 203mm front and rear disc rotors with a listed thickness of 2.3mm.

Larger rotors provide a greater braking surface and leverage for the caliper, helping manage heat and braking force during repeated stops.

The combination of four piston calipers and 203mm rotors gives the X5 AWD a substantial braking system for its motor output and overall weight.

Shimano 7 Speed Drivetrain and Pedaling Control

The TESWAY X5 AWD features a Shimano 7 speed drivetrain, giving riders more control over their pedaling effort.

Different gears are useful for different riding conditions:

• Lower gears: Help make pedaling easier when climbing hills or starting from a stop.

• Middle gears: Work well for everyday riding and moderate speeds.

• Higher gears: Allow riders to maintain a more suitable pedaling rhythm on flatter roads.

The bike also uses a 52T chainring with a dual chain guard.

The larger chainring supports efficient pedaling, while the chain guard helps reduce the chance of the chain coming off and prevents clothing from getting caught in the drivetrain.

Combined with five pedal assist levels, the Shimano drivetrain gives riders more flexibility to manage their own effort and motor assistance.

Smart Lighting and Additional Features

Beyond its motor and battery systems, the X5 AWD includes several additional features designed for everyday convenience and visibility.

Motorcycle Style Front Headlight

The front lighting system features a motorcycle inspired design with an integrated horn and a 99 lumen auto sensing headlight.

The light is designed to adjust its illumination automatically based on surrounding light conditions, and it has an IPX6 water resistance rating.

Brake Sensing Taillight

The rear light automatically increases its brightness when you apply the brakes.

This gives riders behind you a clearer indication that you are slowing down, which is particularly useful when riding in traffic or in low light conditions.

USB Charging Port

The LCD control system includes a USB charging connection for compatible devices.

This provides an additional way to keep small electronics powered while riding, especially on longer journeys.

Full Aluminum Pedals

The X5 AWD uses full aluminum pedals rather than standard plastic pedals.

TESWAY states that these pedals are three times stronger than plastic pedals and are designed to provide better durability under load.

Additional Water Bottle Mounts

The frame includes additional water bottle mounting points, giving riders more flexibility when carrying water and other essentials on longer rides.

Frame Weight and Payload Capacity

The TESWAY X5 AWD is built with a reinforced non folding frame and has a maximum payload capacity of 400 lbs (181 kg).

This figure refers to the combined weight of the rider and any additional cargo, rather than the weight of cargo alone.

The bike's weight is another important consideration:

The removable battery gives riders the option to take the battery off before lifting or moving the bike, reducing the weight they need to handle by approximately 29.8 lbs.

However, the remaining bike still weighs around 89 lbs without the battery. This is worth considering if you plan to carry it upstairs, load it into a vehicle, or store it in a small space.

The X5 AWD is therefore better suited to riders who have enough room for a full size electric bike and do not need a lightweight or folding design.

What Do X5 AWD Riders Say?

One TESWAY X5 AWD owner, weighing 265 lbs, shared his experience with the bike. He highlighted its strong motor performance, comfortable ride, and the peace of mind that comes with its large battery.

"Purchased this bike to be bale to ride without fear of not making it back home. I have lumbar issues and have had many operations to repair. I love riding and wanted to ride again. I enjoy riding around in my neighborhood and shortest ride being 2mi each evening until its too cold. I wanted this bike so I didnt have to worry about being too far from home and my back start bothering me. I do not have to worry about range wit this bike. I am a larger guy (265 lbs) the x5 awd pulls me just fine and more than enough power for me. Its a comfortable ride. Only issue i had was the assembly instructions are a little vague and getting ahold of someone in customer support can be a chore. I beleive time zones and high volume of customers may be the main factor with customer service contact. Overall im very happy with the X5 and look forward to riding everyday"

— E. Chase, TESWAY X5 AWD Owner

Who Is the TESWAY X5 AWD Designed For?

The TESWAY X5 AWD is designed for riders who want a combination of strong motor performance, extended battery range, and an easier to access frame.

It may be a good fit if you:

• Want a step through electric bike with a powerful dual motor system.

• Prefer a lower frame opening for easier mounting and dismounting.

• Regularly ride on hills, gravel roads, and mixed terrain.

• Need a large battery for longer rides.

• Want the flexibility to switch between Single Drive and Dual Drive modes.

• Prefer wider tires and front and rear suspension for added comfort.

• Want a bike with a maximum payload capacity of 400 lbs.

However, the X5 AWD is not a lightweight commuter bike. Its listed weight is 119 lbs, and the battery alone weighs 29.8 lbs. Its non folding frame also means it is less convenient to store in tight spaces than a folding electric bike.

Its advertised maximum speed of 38 mph is another important consideration. E-bike speed, motor power, throttle, and road access rules vary by state and local area. Check the regulations where you plan to ride before using the bike on public roads or shared paths.

Overall, the X5 AWD is a better fit for riders who prioritize motor power, battery capacity, frame accessibility, and a wide range of riding features over portability.

TESWAY X5 AWD Specifications

FAQs

How powerful is the TESWAY X5 AWD?

The TESWAY X5 AWD uses two 1000W motors with 2000W of combined rated power and up to 3600W of peak power. It also delivers up to 200Nm of torque for acceleration and hill climbing.

How far can the TESWAY X5 AWD travel on one charge?

The X5 AWD offers up to 200 miles of range in pedal assist mode and up to 180 miles in pure electric mode. Actual range depends on rider weight, terrain, speed, assist level, and motor drive mode.

Can the TESWAY X5 AWD switch between single and dual motor modes?

Yes. The X5 AWD supports Single Drive and Dual Drive modes. You can switch between them using the Info button on the handlebar control unit. Single Drive uses one motor, while Dual Drive activates both the front and rear motors.

What is the top speed of the TESWAY X5 AWD?

The listed maximum speed is up to 38 mph, with a default speed of 16 mph. Actual permitted riding speeds depend on local e-bike regulations.

Is the TESWAY X5 AWD a step through electric bike?

Yes. The X5 AWD features a step through frame that makes getting on and off the bike easier. It uses a reinforced non folding frame rather than a folding design.

Does the TESWAY X5 AWD have a removable battery?

Yes. The 52V 60Ah battery is secured to the frame with a key lock. You can charge it while installed on the bike or remove it and charge it separately.

How long does it take to charge the TESWAY X5 AWD battery?

The X5 AWD comes with a 58.8V 8A fast charger. TESWAY states that it can charge the battery up to 50% faster than a standard 5A charger. Actual charging time depends on the battery's remaining charge and charging conditions.

What is the maximum payload capacity of the TESWAY X5 AWD?

The TESWAY X5 AWD has a maximum payload capacity of 400 lbs (181 kg). This includes the rider and any additional cargo.

What size tires does the TESWAY X5 AWD use?

It comes with 20 x 4.0 inch Kenda fat tires. These wide tires provide stability and traction on paved roads, gravel, and light off road trails.

Does the TESWAY X5 AWD have suspension?

Yes. It features a 120mm hydraulic dual crown front fork with lockout and a rear spring suspension system to help absorb bumps and vibrations.